NetBackup HOWTO's

NBU Howto Site

Recent Comments
- Joe: What needs to be installed on the Media Server if it is Linux? Anything need to be installed on the Master Server?
- Steup: Matthew is somewhat right as extracting the archive containing NB_650_ICS on windows will break all the symbolic links, and render the full ICS install useless... Just use unix, for all you needs.
- cbull: I run a Netbackup Windows environment and get the "missing path" a lot. It's usually caused by ghost devices and here's how to fix it. Delete the "missing path" devices from the Device -> Drives portion of the NBU GUI. Then go to the media server the drives are connected to and open up a CMD.EXE prompt. Type in "set devmgr_show_nonpresent_devices=1" (notice underscores) then type "start devmgmt.msc". The device management snapin should appear. Under the View menu, select "show hidden devices". Drill down to your tapes drives. If you see any tape drive devices that are grayed out, delete them. While you're there, verify that all the tape drives have Symantec drivers and not the built in Windows driver. Reboot the media server. When it comes back up use the same procedure to verify that the correct number of devices are showing in device manager and that there are no ghost devices. Then go to your NBU GUI and run the device discovery wizard for that media server. The correct tape devices should now show up in the GUI and without the "missing path". Hope it helps! cbull
- savas: Hi, On windows: to stop all netbackup services from command line: NetBackup_Installation_PATH\bin\bpdown.exe to start all netbackup services from command line: NetBackup_Installation_PATH\bin\bpup.exe Typically: C:\Program Files\Veritas\NetBackup\bin\bpdown.exe C:\Program Files\Veritas\NetBackup\bin\bpup.exe On Un*x: to stop all netbackup services from command line: NetBackup_Installation_PATH/bin/bpdown or /etc/init.d/netbackup stop to start all netbackup services from command line: NetBackup_Installation_PATH/bin/bpup or /etc/init.d/netbackup start Typically: /usr/openv/netbackup/bin/bpdown /usr/openv/netbackup/bin/bpup
- AA: How to reboot NBU master server on commandLine
- Tom: Also please remember to choose "Enable Granular Recovery" restore option when creating the backup policy on NetBackup
- Anonymous: If your master server is not Windows based, then you need to install an "enterprise client for windows" license.
Random Posts
Tag Cloud
- apache apache2 backup backup error cleaning esx exchange granular backup granular backup Howto infrastructure logs modsecurity modsecurity2 mod_security mod_security2 ms-sql nbu nbu installation nbu tips nbu troubleshooting nbu upgrade netbackup Netbackup Howto netbackup installation netbackup logs NetBackup Tips netbackup troubleshooting netbackup upgrade oracle Oracle Backup oracle tips restore rman robot robtest tape tips Tips Troubleshooting unix upgrade to 6.5.3 vcb virtualization virtual machines vmware wordpress

Tape Problems

28 April 2009 – 13:43

If you encounter problems with tapes double check that the tape was not frozen before.

on Master Server -> Media, right click on the tape and if selectable, click on “Unfreeze”, and try again.

If you liked this site, please support NetBackupHowto

Written by savasirez

M	T	W	T	F	S	S
« Mar				May »
		1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30

Recent Comments

Random Posts

Tag Cloud

Tape Problems

Leave a Reply

Search

Categories

Advertisements

Polls

Posts by Calendar

Archives

Meta